Town areas to be completed and detailed in steps, and then show examples of lighting changes in different weather/time of day at that location. Final photos of this area soon.
middle of town with Woodland Scenics just plug lights being installed.
Scouting scenes on layout for photography
As a photographer, I am starting to look at sections of the in progress layout to work up into completed photographs of scenes, looking to do this in different weather scenarios, time of day, etc. I will put up several in the next few posts and then later I’ll recall them and the finished photographs.
View across main line and siding to town
Further wiring for the town
Finally getting some light for the town started, with some streetlights and gas lamps for in front of the hotel
Next getting LEDs hooked up inside the town buildings, with some window dressings.
Wiring the movable access section part of the town for lighting
Using several kinds of lighting including woodland scenics Just Plug, strips of long reel leds
as well as some 12-16 volt incandescent Veissmann gas lamps.
Wires for town site
Rigging bus bars and Just Plug light hub to a couple of mini plugs [added later) so the access section can be removed if needed with little trouble.
under the town section wiring in progress
About to add Loksound decoder in Proto 2000 FB-2 and non Sound in FA2
Here is the FA2 and FB2 with their shells off.
Proto 200 FA2 and FB2
Will put up additional shots of the finished installation once completed. There is room in the B unit for a speaker where the cab appears in the A unit. They used the same chassis for both.
Adding details and lighting to highway underpass
Finishing the highway underpass leading out of town. I added led lighting and safety railings, as I have made the sidewalks higher above the road surface.
self adhesive LED strip light and connector
Here the railings have been added and some random trash added. (might add more later)
almost ready to install
View from road under the bridge showing lights, railing and a poster on the wall
Under the bridge
Will add a wall surface from sidewalk to the Road before installing the underpass
Cutting custom angles on Woodland Scenics foam inclines
Hi,
Needed to have risers at different angle than the standard 2, 3 or 4% for replacing lead up to bridge and overpass.
removing old risers on Bridge lead
Cutting risers lightly glued to board on band saw.
cutting on band saw
Ready to install.
Cut section
In Progress Gas Station Concrete Pad
Continuing town Building with concrete pad and wiring for soon to be Gulf Gas Station
Gulf Station in progress
Overall view of The Great Germantown and Northwestern railroad
Here is a general view of the layout, more detailed views coming soon. Working on several areas, including the Town and Logging area as well as the Yard.
overall Layout
Continuation of Town Planning
Adding town areas,including streets, lighting etc.
Tracing paper planning for styrene town base, including placement of street lights